Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Sportage
    4. : How to replace the rear light bulbs on a Kia Sportage

Kia Sportage - Video tutorial

Model: Kia Sportage QL, MK 4 - Years 2016-2022
Part: Rear light bulb
Operation: How to replace the rear light bulbs on a Kia Sportage

The rear lights of your Kia Sportage no longer work? Let's see in this video how to replace damaged bulbs after removing the rear light. We open the hood of the luggage compartment, remove the plastic cover (located on the side) with a screwdriver; unscrew (with a socket wrench or screwdriver with insert) the tightening screws located on the side of the rear light. As soon as the headlight is free from any constraints, we can detach it from the bodywork (disconnect the relative power supply terminals). We replace damaged bulbs with pieces of the same size and voltage. Finally we go to reassemble the lighthouse and proceed backwards in the assembly of the other pieces.


Posted on 18 November 2023 by ScegliAuto



How to remove Kia Sportage taillight and bulbs
Kia Sportage (2016-2022 / QL, MK 4) Let's see today the guide and the main instructions that will allow us to disassemble and replace the taillight and all its bulbs on the Kia Sportage
How to remove the rear light of a Kia Sportage
Kia Sportage (2010-2016 / SL, MK 3) Let's see how to remove the rear light of a Kia Sportage and how to replace the bulbs inside it. We open the bonnet of the luggage compartment, with
How to remove the rear light of a Kia Sportage
Kia Sportage (2004-2010 / MK 2, KM) Let's see how to remove the rear light of a Kia Sportage and how to change the damaged bulbs inside it. We open the bonnet of the luggage compartment

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos