|
Do it yourself
| |||
| ||||
How to Replace the Climate Control Bulb in the Kia Picanto
Model: Kia Picanto
TA, MK 2
- Years:
2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Video tutorial
Replacing the bulb that illuminates the climate control switches in the Kia Picanto is a mechanically simple task, but access is very tight, making it complicated. Start by disconnecting the battery and gently removing the plastic trim surrounding the stereo and climate control unit. Once the panel is removed, unscrew the screws securing the climate unit and carefully extract it from the housing, being mindful of the rear electrical connectors. The burnt-out bulb is usually a very small T5 wedge bulb located on a base. Grip it with needle-nose pliers and pull firmly. Inserting the new one requires delicacy. At this point, reconnect the battery and check its operation; if it works, you can put everything back in place. Keep in mind that the working space is really minimal. The difficulty lies not in the operation itself, but in handling the tiny bulb in the confined space: as shown in the video, it can test your patience. Prepare for some frustration!
Posted on 1 July 2026 by ScegliAuto
Related tutorials
Kia Picanto
(2004-2011 /
MK 1, 2A)
To replace the headlight bulb on a Kia Picanto, open the bonnet to access the engine bay and remove the circular plastic cover located at the back of…
Kia Picanto
(2011-2018 /
TA, MK 2)
Good morning, today's objective is to remove the front position light bulb of your Kia Picanto. Start by lifting the front of the car with a jack. Th…
Kia Picanto
(2011-2018 /
TA, MK 2)
Replacing the left front headlamp bulb in a Kia Picanto is a very simple and quick task to perform independently. Start the procedure by turning the …
Other guides you may be interested in
|
How to open the boot if it is stuck on a Mercedes B-Class?
On the Mercedes B-Class, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In this case, perform the emergency opening by following the simple procedure shown in this tutorial. First, unlock the locks with the remote control, then open the rear doors and, by operating the indicated lever, lower the backrest of the seat. Next, go inside the boot, locate the indicated gap, and manually unlock the lock using a small screwdriver. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.055
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
