Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the battery of a Hyundai/Kia remote control

Model: Kia KIA Various
Part: Key

Video tutorial

To perform the operation, you will need a CR2032 battery, which can be easily obtained from any supermarket or electronics store. First, remove the physical emergency key by locating the release lever on the side of the remote (usually near the base).

Press the lever while simultaneously pulling out the metal blade. With the blade removed, you will see a slot where it was inserted: insert a small flathead screwdriver into the slot and gently pry apart the two halves.

Now you can see the CR2032 battery: check the polarity to ensure you insert the new battery in the same position, and replace it. Reattach the rear half of the remote, pressing evenly along the edges, and reinsert the emergency key.


Posted on 4 September 2026 by ScegliAuto


Related tutorials

How to replace the battery of the Kia K5 remote control
How to replace the battery of the Kia K5 remote control
Kia KIA Various The steps to replace the battery of a 2021 Kia K5 remote control are simple and quick to perform independently. The steps to follow are: - Remove the…
How to change the battery and shell of a Kia/Hyundai car remote?
How to change the battery and shell of a Kia/Hyundai car remote?
Kia KIA Various Let's see how to change the battery and the shell of a Kia/Hyundai remote: to change the battery, open the small cover on the back of the remote. Ins…
How to replace the battery of the Kia vehicle remote control
How to replace the battery of the Kia vehicle remote control
Kia KIA Various Today we will explain how to replace the battery of the remote control for Kia vehicles. To perform this operation, we need to remove the top part of…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos