Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Steering Tie Rods on a Kia Picanto MK1

Model: Kia Picanto - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Tie rods

See other generations:
Video tutorial

On the Kia Picanto MK1 (2004-2011), replacing the steering tie rods requires: a jack and axle stands, a socket wrench, a torque wrench, a ball joint separator (or hammer), penetrating oil, and the new part. The part number for the outer tie rod is KYB KTR1321, which can be found on eBay with the code 287665809846 for £24.09, with free delivery.

Lift the car and remove the wheel. Use a wire brush to clean the threads of the tie rod to remove rust and dirt.

Loosen the locking nut on the inner tie rod, but do not remove it completely. Disconnect the ball joint from the hub: remove the split pin and nut, then use a separator or strike the hub with a hammer to release the taper pin. Unscrew the old tie rod, counting the turns to ensure the new one can be fitted in the same position to maintain approximate alignment.

Screw in the new tie rod, insert the pin into the hub, tighten the nut (torque 24.5-34 Nm), and secure the lock nut. Refit the wheel. After replacement, it is essential to have the alignment checked at a garage; otherwise, you risk uneven tyre wear and imprecise handling.


Posted on 18 November 2026 by ScegliAuto


Related tutorials

…
Kia Picanto (2004-2011 / 2A, MK 1) Today we will discover the information that will allow us to disassemble and replace the external rearview mirror of the Kia Picanto. First, we open …
Kia Picanto (2011-2018 / MK 2, TA) In order to program the key of the Kia Picanto, you will need to connect a diagnostic tool to the OBD port of the vehicle: this port can be found on …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to find and enter the unlock code for the radio in the Dacia Dokker?

In this tutorial, you will learn how to find and enter the unlock code for the radio in the Dacia Dokker, a very simple operation necessary after replacing the battery. The code is usually found with the various documents provided at purchase, but if lost, it can be retrieved through various online services. These services require the serial number of the radio, which is located on the label on the top side of the unit. Once you have the unlock code, you can turn on the radio and enter it by repeatedly pressing the "1", "2", "3", and "4" buttons, and save the setting with the "6" button.

Watch the video!


by ScegliAuto

More videos