Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Car Radio on Kia Rio

Model: Kia Rio DC, MK 1 - Years: 2000, 2001, 2002, 2003, 2004, 2005
Part: Car stereo

See other generations:
Video tutorial

Let's replace the original car radio fitted in a Kia Rio; see how to remove and change it for a new one. Remove the stereo trim with a plastic lever (where the air vents are located), detach it from the centre console without breaking it. Once the stereo is free from the plastic trim, unscrew the securing screws located on either side using a screwdriver.

Pull out the stereo with your hands and disconnect the cables (power and antenna).

Connect the power connector to the new car radio, insert it into the housing. Refit the trim.


Updated on 16 March 2026 by ScegliAuto


Related tutorials

Kia Rio (2011-2017 / UB, MK 3) Below is the guide necessary to remove and replace the standard car radio in the Kia Rio. First, get inside the vehicle and start by removing the pla…
Kia Rio (2011-2017 / UB, MK 3) Before you can start, open the rear doors of your Kia Rio. Then, enter the cabin. This will allow you to reach the clips that hold the rear seats in …
Kia Rio (2011-2017 / UB, MK 3) If you intend to replace the cabin air filter on your Kia Rio third generation yourself, follow the steps described below. First, ensure you have a n…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos