Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Car Radio from the Kia Rio

Model: Kia Rio UB, MK 3 - Years 2011-2017
Part: Car stereo

Below is the guide necessary to remove and replace the standard car radio in the Kia Rio. First, get inside the vehicle and start by removing the plastic cover of the dashboard using a thin plastic lever; then, unscrew the fastening screws located on the side of the car radio, as shown in the video. At this point, disconnect the electrical connectors found behind the car radio, removing it and replacing it with the new one if necessary; reconnect the electrical connections and secure the car radio to the dashboard!

Updated on 25 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Headlamp on a Kia Rio
How to Remove the Front Headlamp on a Kia Rio
Kia Rio (2005-2011 / DE, MK 2) In this guide, learn how to remove the front headlamp on a second-generation Kia Rio by following these simple instructions. First, open the bonnet o…
How to turn on and off the car radio of the Kia Rio 3
How to turn on and off the car radio of the Kia Rio 3
Kia Rio (2011-2017 / UB, MK 3) Turning on and off the radio of the Kia Rio model mk3 in case of necessity is a very simple operation that requires the use of only one step and a fe…
Removing the Car Radio on Kia Rio
Removing the Car Radio on Kia Rio
Kia Rio (2000-2005 / DC, MK 1) Let's replace the original car radio fitted in a Kia Rio; see how to remove and change it for a new one. Remove the stereo trim with a plastic lever …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos