Do it yourself
Frequently asked questions about cars and motorcycles

Removing Rear Wiper on Kia Rio

Model: Kia Rio DE, MK 2 - Years 2005-2011
Part: Windshield wipers

Are the front wiper blades worn out? Here's how to remove them. Take the front wiper blade, pull it down from the metal arm, and slide it off the arm on the left. Fit the new blade onto the moving arm. Lower the wiper arm onto the windscreen and replace the adjacent blade. Test the new blade by operating the control levers. It is always preferable to use original parts for better durability and quality. Replace the rear wiper blade if damaged (use the same procedure).

Updated on 17 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Kia Rio (2011-2017 / UB, MK 3) To replace the wiper blades on a Kia Rio, lift the wiper arm and work on the pin that secures the blade to the arm. Once the pin is released, lower t…
Kia Rio (2017-2023 / ) Lift the rear wiper arm and, using both hands, bend the end outward and snap it forcefully at the midpoint: this will be enough to detach the blade. …
Kia Rio (2011-2017 / UB, MK 3) In today's tutorial, you will learn how to remove the tailgate panel on a third-generation Kia Rio by following these simple steps. First, open the b…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos