Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Carens
    4. : Remove door panel on kia Carens

Kia Carens - Video tutorial

Model: Kia Carens MK 2 - Years 2006-2013
Part: Door panel
Operation: Remove door panel on kia Carens

Remove the panel from the Kia Carens? We disassemble the panel if we want to replace it or remove pieces inside the door. With a screwdriver we go to unscrew the tightening screws placed in the plastic handle and in the opening space of the lever. Once all the screws have been removed, with the lever we remove all the plastic clips that block the door. We detach the door panel by hand, unhook any power supply terminals and release cable. We carry out the necessary maintenance on the door or replace the damaged panel with a new one. We first fix the panel above the door and then screw in all the screws.


Posted on 14 December 2023 by ScegliAuto



How do I remove the door panel from the Kia Carens?
Kia Carens (1999-2006 / ) In order to remove the door panel of the Kia Carens you have to loosen the screws located above the speaker and under the internal cover in correspon
How to open the tailgate of the KIA Carens?
Kia Carens (2013-2019 / MK 3) In the KIA Carens, it may happen that the tailgate gets stuck, for example due to a problem with the lock actuator or the related control module. In
Where are the fuses located in the Kia Carens?
Kia Carens (2006-2013 / MK 2) Every fuse of the Kia Carens is located inside one of the appropriate fuse boxes that are present in the vehicle: in this type of vehicle, two can be

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos