Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Timing Belt of the Kia Carens

Model: Kia Carens MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Timing belt

See other generations:
Video tutorial

Below are the main steps that will allow you to remove and replace the timing belt of the Kia Carens. First, open the bonnet of your car and start by removing the front wheel and the wheel arch liner; then remove the serpentine belt and unscrew the screws of the timing cover, as shown in the video.

At this point, take the necessary references for replacing the timing belt; then install the new one, of the correct type, ensuring it fits perfectly between the various pulleys, following the video tutorial to the end!


Updated on 21 May 2026 by ScegliAuto


Related tutorials

Where is the fuse box of the Kia Carens 3 located?
Where is the fuse box of the Kia Carens 3 located?
Kia Carens (2013-2019 / MK 3) If you own a third edition Kia Carens and want to locate the fuse box located inside the engine compartment, all you have to do is follow these steps…
Where is the Oil Filter on a Kia Carens?
Where is the Oil Filter on a Kia Carens?
Kia Carens (2013-2019 / MK 3) When the red oil warning light comes on in a Kia Carens, it means that you need to replace the engine oil and the corresponding filter. The oil filte…
How to reset the service indicator of the Kia Carens
How to reset the service indicator of the Kia Carens
Kia Carens (2022-2026 / MK 4) To independently complete the manual reset of the service light on your Kia Carens latest series, simply follow the few simple steps described in the…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos