Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a Kia Venga

Model: Kia Venga MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Battery

This video is currently unavailable

Before starting, open the front bonnet of your Kia Venga. Begin by unscrewing the bolts that secure the terminals to the two battery poles, then disconnect them.

Next, disconnect the two connectors of the ECM, which is located behind the battery. At this point, unscrew and remove the bolts of the battery support brackets using a 12 millimetre spanner.

Once these brackets are removed, you can take out the battery, completing the disassembly. To install the new battery and close everything up, simply repeat these steps in reverse, and the replacement will be complete.


Updated on 5 April 2026 by ScegliAuto


Related tutorials

How to Replace the Battery on a Kia Venga
How to Replace the Battery on a Kia Venga
Kia Venga (2010-2019 / MK 1) Open the bonnet of your Kia Venga. Move the battery cover aside. Next, unscrew and remove the screws securing the two terminals to the battery, then …
How to Replace the Battery of the Kia Venga?
How to Replace the Battery of the Kia Venga?
Kia Venga (2010-2019 / MK 1) To replace the battery of the Kia Venga, open the bonnet to access the components inside the engine bay: just below the windscreen, you will locate t…
How to Adjust the Handbrake on a Kia Venga
How to Adjust the Handbrake on a Kia Venga
Kia Venga (2010-2019 / MK 1) Before you can begin, sit in the driver's seat of your Kia Venga. Start by unfastening and removing the handbrake surround by pulling it upwards. Nex…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos