Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Kia Venga

Model: Kia Venga MK 1 - Years 2010-2019
Part: Battery

In this short guide, we will see step-by-step instructions on how to disassemble and replace the battery of the Kia Venga. First, we open the car's engine hood and start by removing the control unit located next to the battery, unscrewing the brackets' screws found underneath; then we disconnect both battery terminals (positive and negative), as shown in the video. At this point, we remove the battery from its compartment, replacing it with the new one (of the correct type and with the same amperage); we insert it in the correct direction and check the engine's ignition!

Posted on 20 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery of the Kia Venga?
How to Replace the Battery of the Kia Venga?
Kia Venga (2010-2019 / MK 1) To replace the battery of the Kia Venga, open the bonnet to access the components inside the engine bay: just below the windscreen, you will locate t…
How to Adjust the Handbrake on a Kia Venga
How to Adjust the Handbrake on a Kia Venga
Kia Venga (2010-2019 / MK 1) Before you can begin, sit in the driver's seat of your Kia Venga. Start by unfastening and removing the handbrake surround by pulling it upwards. Nex…
How to Replace the Battery on a Kia Venga
How to Replace the Battery on a Kia Venga
Kia Venga (2010-2019 / MK 1) Open the bonnet of your Kia Venga. Move the battery cover aside. Next, unscrew and remove the screws securing the two terminals to the battery, then …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos