Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the On-Board Computer on a Kia Sorento

Model: Kia Sorento MK 3 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Onboard computer

See other generations:
Video tutorial

Start by removing the frame of the screen where the air vents are attached. As shown in the video, this is not a quick operation, although the procedure is very simple: just insert a plastic wedge into the side gaps and lever a small part at a time, extracting it from its housing.

Then, a bit of force will be needed for the final removal. Once done, unscrew the four 8 mm screws (two on each side) that secure the on-board computer.

Remove the screen and disconnect the rear connectors. Proceed in reverse for the installation of the new on-board computer.


Updated on 10 April 2026 by ScegliAuto


Related tutorials
…
How to reset the service light on the 2025 Kia Sorento
How to reset the service light on the 2025 Kia Sorento
Kia Sorento (2020-2026 / MK 4) The Service light reset on a 2025 Kia Sorento vehicle follows simple and quick steps to be done independently after completing the car service. To pe…
How to Reset the Tyre Pressure Warning on a Kia Sorento
How to Reset the Tyre Pressure Warning on a Kia Sorento
Kia Sorento (2020-2026 / MK 4) Today, we will go through the instructions to reset the tyre pressure warning on a Kia Sorento; before resetting the TPMS sensors, ensure all four ty…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos