Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Radiator Fan on the Kia Sorento MK2

Model: Kia Sorento MK 2 - Years 2009-2014

Let's discover the main steps needed to remove and replace the radiator fan on the Kia Sorento second series. First, remove the plastic covers found on the upper and lower parts of the car; then, undo all the fixing screws for the bumper and front lights to remove everything, as illustrated in the video. At this point, undo the screws for the fan, located behind the radiator; disconnect the electrical connector and remove it, following the video to the end for the replacement!

Updated on 22 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Kia Sorento (2009-2014 / MK 2) To replace the heater radiator in the Kia Sorento, you must completely dismantle the dashboard, as the heater radiator is located inside it: start by…
Kia Sorento (2009-2014 / MK 2) How do you replace the radiator on a Kia Soul? Remove the front bumper to access all the radiator mounting screws (check the model type). Lift the ca…
Kia Sorento (2009-2014 / MK 2) Replacing the battery in your Kia Sorento Mk2 is not an impossible task to carry out on your own, but you must pay close attention to avoid safety an…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos