Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Kia
  4. :
  5. Carens
  6. : Replacing the front bulbs on Kia Carens

Kia Carens - Video tutorial

Model: Kia Carens MK 3 - Years 2013-2019
Part: Headlight bulb
Operation: Replacing the front bulbs on Kia Carens

In this case, the tutorial begins with the headlight already removed. As for the arrow bulb, as shown in the video, it is sufficient to slightly unscrew the connector from the rear and the "connector-bulb" duo will come out of its seat. Once this is done, push the bulb towards the connector and unscrew it in turn. For the position light (it is not the high beam, as it is wrongly said in the video) the procedure is the same. We are now dealing with the dipped beam, the main bulb: after having unscrewed the round cover, unhook the metal stop to extract it.


Posted on 29 February 2024 by ScegliAuto



How to replace the bulb in the headlight of Kia Carens
Kia Carens (2006-2013 / MK 2) Is the headlight bulbs burned out? Let's see how to change the light bulb on Kia Carens. We open the bonnet by pulling the lever located at the botto
Guide to replacing the timing belt of the Kia Carens
Kia Carens (2006-2013 / MK 2) Let's see below the main steps that will allow us to disassemble and replace the timing belt of the Kia Carens. First of all we open the bonnet of ou
Where are the fuses located in the Kia Carens?
Kia Carens (2013-2019 / MK 3) In the Kia Carens, each fuse is contained in one of the appropriate fuse boxes that are present in the car: in this type of vehicle, two can be found

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos