Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Gear Knob on a Kia Sportage

Model: Kia Sportage MK 3, SL - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Shift knob

See other generations:
Video tutorial

If your gear knob is more than worn, like the one shown in the video, this short tutorial shows you how to replace it. First, extract the gaiter from the base: as you can see, it has side clips that hold it in place. If you find it difficult to do this by hand, use a plastic wedge to assist.

Then, unscrew the knob/gaiter lock, knowing that it may take some time to extract it. On other knobs, simply pull hard to remove it from the gaiter without removing the latter. Good luck!


Updated on 26 April 2026 by ScegliAuto


Related tutorials

Replacing the Gear Knob of the Automatic Gear Lever on the Kia Sportage
Replacing the Gear Knob of the Automatic Gear Lever on the Kia Sportage
Kia Sportage (2010-2016 / MK 3, SL) Following today's instructions, learn how to remove and replace the gear knob of the automatic gear lever on the Kia Sportage. First, get inside the …
Replacement of the gear shift knob of the Kia Sportage
Replacement of the gear shift knob of the Kia Sportage
Kia Sportage (2010-2016 / MK 3, SL) In this video, we will see how to change the gear knob of a Kia Sportage: first, we need to lift the boot, which we will have removed from its fasten…
Replacement of the gear shift knob of the Kia Sportage
Replacement of the gear shift knob of the Kia Sportage
Kia Sportage (2010-2016 / MK 3, SL) In a few simple steps, we will see how to disassemble and replace the knob of the automatic transmission lever of the Kia Sportage. First, we get int…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos