Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Front Headlight of Kia Carnival-Sedona

Model: Kia Carnival MK 2, VQ - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Headlight

See other generations:
Video tutorial

In this video tutorial, learn how to remove the front headlight of a Kia Carnival or Sedona in simple steps. Open and lift the bonnet, then remove the fixing screws of the headlight located at the top using a socket spanner.

Next, disconnect the headlight and pull it out of its housing, as shown in the video. Now, disconnect the electrical connectors of the bulbs to completely remove it; you can access the bulbs and replace them if needed.

Follow the video to the end for reassembly!


Updated on 2 May 2026 by ScegliAuto


Related tutorials

Removing Original Radio from Kia Carnival
Removing Original Radio from Kia Carnival
Kia Carnival (2006-2014 / MK 2, VQ) In this video tutorial, discover how to remove the original radio from a second-generation Kia Carnival. First, get inside the car and use a plastic …
Where are the fuses located in a Kia Carnival?
Kia Carnival (1998-2006 / MK 1, Kvii) The fuses in a Kia Carnival are located inside the fuse boxes installed in the vehicle: in this type of car, there are two. The first is found in the…
Removal of Rear Seats on Kia Carnival
Removal of Rear Seats on Kia Carnival
Kia Carnival (2006-2014 / MK 2, VQ) In this video, see how to remove the rear seats of a Kia Carnival by following these simple instructions. Thanks to the modularity of the seats, it i…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos