Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fog Light Bulb on the Kia Optima?

Model: Kia Optima / K5 MK 3, TF - Years 2010-2015
Part: Fog lights

To replace the front fog light bulb on the Kia Optima, remove the screws securing the protective panel under the bumper, near the bulb to be replaced. Once the panel is removed, access the inside of the bumper, disconnect the connector, and pull out the old bulb from its housing. After removing the old bulb, insert a new one by connecting it to the connector and reattaching the lower panel of the bumper.

Updated on 8 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulb of the Kia Optima
How to replace the front headlight bulb of the Kia Optima
Kia Optima / K5 (2015-2020 / JF, MK 4) Today we will explain how to replace the headlight bulb on the Kia Optima. To perform this operation, we must first open the hood, then disconnect th…
How to replace the rear headlight bulb of the Kia Optima
How to replace the rear headlight bulb of the Kia Optima
Kia Optima / K5 (2010-2015 / MK 3, TF) In the following guide, we will explain the various steps you need to take in order to properly replace the rear headlight bulb of your Kia Optima. F…
How to replace the license plate lights of the Kia Optima
How to replace the license plate lights of the Kia Optima
Kia Optima / K5 (2010-2015 / MK 3, TF) Today we will discover the instructions that will allow us to disassemble and replace the license plate bulbs of the Kia Optima, in simple steps. Fir…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos