Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the TPMS Light on the Kia Soul

Model: Kia Soul MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Tire pressure warning light

See other generations:
Video tutorial

If you notice the orange light indicating tyre pressure when starting your Kia Soul Mk1, it means the sensor has detected suboptimal pressures. To quickly eliminate the light, simply inflate one or more tyres to the correct pressure.

This value can be easily found on the information sticker located on the inside of the driver's door. Use an appropriate compressor and set the pressure recommended by Kia. Inflate the tyres and finally turn off and restart the ignition.

At this point, the light should have disappeared.


Updated on 16 May 2026 by ScegliAuto


Related tutorials

How to Reset the TPMS on a Kia Soul
How to Reset the TPMS on a Kia Soul
Kia Soul (2013-2018 / MK 2) This tutorial shows how to reset the tyre pressure monitoring system (TPMS) light on a Kia Soul. No special manual procedures are required; as with o…
How to Reset the Service Light on a Kia Soul
How to Reset the Service Light on a Kia Soul
Kia Soul (2013-2018 / MK 2) After changing the engine oil and oil filter, you will need to reset the maintenance light; here’s how to reset the service light on a Kia Soul. Firs…
How to reset the oil light on the Kia Soul
How to reset the oil light on the Kia Soul
Kia Soul (2008-2014 / MK 1) The manual reset of the engine oil light on your first generation Kia Soul is a very simple operation and you can carry it out by following the steps…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos