Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing or Replacing the Car Radio

Model: Kia Sorento MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Car stereo

See other generations:
Video tutorial

This guide shows how to remove or replace the car radio in your vehicle. First, start by removing the two air vent covers located directly beside the radio using the appropriate tool.

Next, unscrew all the screws found under the two covers and carefully pull out the large radio cover, being mindful of the wires still connected. Finally, unscrew the last four screws that secure the radio and proceed to extract it by gently pulling it towards you, taking care with the various electrical connections at the back.


Updated on 11 February 2026 by ScegliAuto


Related tutorials

How to Reset the Radio in a Kia Sorento
How to Reset the Radio in a Kia Sorento
Kia Sorento (2009-2014 / MK 2) This guide shows how to perform a forced reset of the standard radio in a Kia Sorento, following the instructions below. First, get inside the vehicl…
Removing and Extracting the Car Radio
Removing and Extracting the Car Radio
Kia Sorento (2009-2014 / MK 2) To carry out the disassembly operation shown in the guide, position the gear lever in the central position and gently push up the frame and the gear …
How to Remove and Replace the Radio in a Kia Sorento
How to Remove and Replace the Radio in a Kia Sorento
Kia Sorento (2002-2009 / MK 1) Today, discover the procedure for removing and replacing the standard radio with a new multimedia system in the Kia Sorento. First, get inside the ca…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos