Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing and Extracting the Car Radio

Model: Kia Sorento MK 2 - Years: 2009, 2010, 2011, 2012, 2013, 2014
Part: Car stereo

See other generations:
Video tutorial

To carry out the disassembly operation shown in the guide, position the gear lever in the central position and gently push up the frame and the gear lever cover. You can then remove the centre console by lifting it gently and disconnecting the cigarette lighter connector.

Once done, proceed to unscrew the nuts inside the tunnel that hold the radio bracket using a ratchet spanner. You can then remove the panel along the edges by gently pulling it upwards.

At this point, you can lift the entire console and disconnect the connectors behind the car radio to extract it.


Updated on 10 February 2026 by ScegliAuto


Related tutorials

Removing or Replacing the Car Radio
Removing or Replacing the Car Radio
Kia Sorento (2002-2009 / MK 1) This guide shows how to remove or replace the car radio in your vehicle. First, start by removing the two air vent covers located directly beside the…
Dismantling the Radio Dashboard
Dismantling the Radio Dashboard
Kia Sorento (2009-2014 / MK 2) Position the gear lever in the central position and gently push up the frame and the gear lever cover, simultaneously moving the gear knob in circula…
How to Reset the Radio in a Kia Sorento
How to Reset the Radio in a Kia Sorento
Kia Sorento (2009-2014 / MK 2) This guide shows how to perform a forced reset of the standard radio in a Kia Sorento, following the instructions below. First, get inside the vehicl…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos