Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Telluride
    4. : How to replace the rear lights of the Kia Telluride 2020 with led

Kia Telluride - Video tutorial

Model: Kia Telluride MK 1 - Years 2019-2024
Part: Checks and maintenance
Operation: How to replace the rear lights of the Kia Telluride 2020 with led

As shown in the video, to insert LEDs instead of the bulbs that illuminate the trunk when you open it on the 2020 Kia Telluride, you need to perform a series of fairly simple operations. First locate the trunk handle and open it to unscrew the two screws that secure the panel to the body. Then you will have to carefully and carefully unclip the upper plastic cover of the trunk as shown in the video. Once opened you will have to identify the housings of the bulbs and replace them with the LEDs. Once tested and verified that they are working, reassemble everything.


Posted on 29 August 2022 by ScegliAuto



How to disassemble the rear lights in KIA Telluride?
Kia Telluride (2019-2024 / MK 1) Removing the rear lights from the KIA Telluride, as we can see in this tutorial, is an extremely simple and fast operation. Before proceeding, in ord
How to replace the remote control battery in KIA Telluride?
Kia Telluride (2019-2024 / MK 1) Replacing the remote control battery of the KIA Telluride, as we can see in this tutorial, is an extremely simple and fast operation. To do this, fir
How to replace the battery of the KIA Telluride remote control?
Kia Telluride (2019-2024 / MK 1) As we can see in this tutorial, replacing the battery of the KIA Telluride remote control is a very simple and quick operation. To do this, we will o

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos