Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Tail Lights on the KIA Telluride?

Model: Kia Telluride MK 1 - Years 2019-2026
Part: Tail light

Removing the tail lights on the KIA Telluride, as shown in this tutorial, is a very simple and quick task. Before proceeding, to work safely, ensure the key is not in the ignition. Start by opening the trunk, then pry off the plastic panel located on the inner edge of the light assembly. Next, access the three mounting bolts, remove them, grasp the light, and pull it out from the body towards you. Finally, disconnect the power connector and install the replacement by following the reverse procedure.

Updated on 1 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the 2023 Kia Telluride
How to reset the service light on the 2023 Kia Telluride
Kia Telluride (2019-2026 / MK 1) If you do not know how to manually reset the service light on your 2023 Kia Telluride, do not worry because in the following guide you will find the …
How to Reset the Service Light on a KIA Telluride?
How to Reset the Service Light on a KIA Telluride?
Kia Telluride (2019-2026 / MK 1) Resetting the service light on a KIA Telluride is a very simple and quick operation. First, ensure you have completed all scheduled maintenance tasks…
How to Set the Time in the KIA Telluride?
How to Set the Time in the KIA Telluride?
Kia Telluride (2019-2026 / MK 1) In this tutorial, you will learn how to set the time in the KIA Telluride, a very simple and quick operation to perform, for example, after disconnec…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos