Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Headlight on the Kia Telluride

Model: Kia Telluride MK 1 - Years 2019-2026
Part: Tail light

If you need to replace the rear headlight on this vehicle model, you can find instructions in the video and description below. First, open the trunk and get a plastic trim tool to remove the panel located on the inner side of the light assembly. Under the panel, you will find the screws securing the headlight that you will need to remove. At this point, you can pull the light assembly towards you and first disconnect the electrical connector located at the back, and you're done.

Updated on 15 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Remote Battery for the KIA Telluride?
How to Replace the Remote Battery for the KIA Telluride?
Kia Telluride (2019-2026 / MK 1) Replacing the remote battery for the KIA Telluride, as shown in this tutorial, is an extremely simple and quick operation. First, obtain a CR2032 bat…
How to reset the service light on the 2023 Kia Telluride
How to reset the service light on the 2023 Kia Telluride
Kia Telluride (2019-2026 / MK 1) If you do not know how to manually reset the service light on your 2023 Kia Telluride, do not worry because in the following guide you will find the …
How to Reset the Service Light in the 2021 Kia Telluride?
How to Reset the Service Light in the 2021 Kia Telluride?
Kia Telluride (2019-2026 / MK 1) Resetting the service light in the Kia Telluride is done through a procedure that starts by turning on the instrument cluster and pressing the button…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos