Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Factory Radio in the Kia Cerato?

Model: Kia KIA Various
Part: Car stereo

The Kia Cerato comes with an older factory radio that lacks the smart features of more recent models. Fortunately, you can replace this accessory with a more advanced one. But how do you dismantle the factory radio? It's simple. Remove the plastic strip beneath the knobs and then unscrew the four highlighted screws. Do the same with the dashboard plastic surrounding the radio. Both are clipped in, so you can use a flat screwdriver to assist with their removal, but no special tools are needed. After removing the additional screws, you can pull out the radio and disconnect the plugs.

Updated on 12 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Kia KIA Various After changing the oil on the Kia Cerato, we need to reset the control system that alerts us to the need for maintenance. We sit in the driver's seat…
Kia KIA Various Resetting the service light on a KIA Cerato, as shown in this tutorial, is an extremely simple and quick operation. Before proceeding, ensure you hav…
Kia KIA Various If you own a 2017 Kia Cerato and have noticed that the service light remains on the dashboard even after performing the car service, follow these ste…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos