Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Engine Oil and Filter on the Kia Mohave Borrego [WORLD]

Model: Kia Mohave Borrego HM - Years 2008-2019
Part: Engine oil

If you intend to replace the engine oil and oil filter on this vehicle model, the guidelines and procedures to follow for a proper replacement are outlined below. First, open the hood and lift the vehicle. Proceed to unscrew the oil drain plug located under the oil pan, then use the specific wrench to unscrew the oil filter. Install the new filter after replacing the gasket, then re-screw the drain plug. >Return to the engine to fill the system with the new lubricant.

Updated on 29 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the Fuse Box Located on a Kia Mohave Borrego?
Where is the Fuse Box Located on a Kia Mohave Borrego?
Kia Mohave Borrego (2008-2015 / ) In this video tutorial, you can see where the fuse box is located on a Kia Mohave Borrego, following simple steps that will help you manage your vehi…
How to Replace the Alternator on the Kia Mohave Borrego V6
How to Replace the Alternator on the Kia Mohave Borrego V6
Kia Mohave Borrego (2008-2019 / HM) Today, you will learn how to remove and replace the alternator on the Kia Mohave Borrego V6 by following these simple instructions. First, open the h…
How to Replace the Cabin Filter on Kia Mohave Borrego
How to Replace the Cabin Filter on Kia Mohave Borrego
Kia Mohave Borrego (2008-2019 / HM) In this video tutorial, you can see how to replace the cabin filter on a Kia Mohave Borrego by following a few simple steps: the first thing to do is…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos