Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Pollen Filter on a Kia Venga

Model: Kia Venga MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Cabin air filter

Video tutorial

In this video tutorial, you can see how to replace the pollen filter on a Kia Venga by following a few simple steps: the first thing to do is purchase a new pollen filter; the next step is to get inside the vehicle, turn off the car, and pull the handbrake.

The pollen filter in this vehicle is located behind the glove compartment, so open the glove box and remove all items inside; remove the upper drawer using a cross screwdriver; take out the old cabin filter and position the new filter with the arrows facing towards the cabin.


Updated on 3 August 2026 by ScegliAuto


Related tutorials

How to Adjust the Handbrake on a Kia Venga
How to Adjust the Handbrake on a Kia Venga
Kia Venga (2010-2019 / MK 1) Before you can begin, sit in the driver's seat of your Kia Venga. Start by unfastening and removing the handbrake surround by pulling it upwards. Nex…
Wiper Blade Replacement on a Kia Venga
Kia Venga (2010-2019 / MK 1) In this brief video guide, you will see the step-by-step procedure for replacing the wiper blades on a first-generation Kia Venga, produced from 2010…
How to Replace the Battery of the Kia Venga?
How to Replace the Battery of the Kia Venga?
Kia Venga (2010-2019 / MK 1) To replace the battery of the Kia Venga, open the bonnet to access the components inside the engine bay: just below the windscreen, you will locate t…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos