Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery on Kia Rio

Model: Kia Rio MK 4, SC, YB - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Battery

See other generations:
Video tutorial

In this short video tutorial, we will see how to replace the battery on a fourth-generation Kia Rio. First, open the bonnet and begin by removing the two battery cables. Remove the negative terminal (black) first, followed by the positive terminal (red). To remove the latter, lift the cable cover and then unscrew the bolt.

Now, carefully remove the side protection of the battery by pulling it upwards, and finally, remove the bolt and the securing bar located at the base of the battery. Once done, you can extract the battery and replace it with a new one by following the steps in reverse.


Updated on 4 August 2026 by ScegliAuto


Related tutorials

How to replace the battery in the Kia Rio remote control
How to replace the battery in the Kia Rio remote control
Kia Rio (2016-2023 / MK 4, SC, YB) Replacing the battery of the Kia Rio car remote is a simple and quick operation to be carried out independently. To replace the battery, we need to p…
How to Replace the Battery in a KIA Rio?
How to Replace the Battery in a KIA Rio?
Kia Rio (2016-2023 / MK 4, SC, YB) In this tutorial, you will see how to replace the battery in a KIA Rio, a very simple and quick operation. First, ensure that the key is not inserted…
How to Replace the Battery in the KIA Rio?
How to Replace the Battery in the KIA Rio?
Kia Rio (2011-2017 / UB, MK 3) In this tutorial, see how to replace the battery in the KIA Rio, a very simple and quick operation. First, ensure that the dashboard is off for safet…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos