Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Fob Battery in a Kia Borrego

Model: Kia Mohave Borrego HM - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Key

Video tutorial

Replacing the key fob battery in a Kia Borrego is a simple and quick task. Take the key fob and first extract the metal key inside; to do this, press the small button located at the end of the fob and simultaneously pull out the key. Now, use a flathead screwdriver to pry open the short side of the fob to access the inside.

Once the fob is open, remove the old battery using the tip of a smaller screwdriver; insert the new battery and close the fob by pressing the two sides together until they snap into place. The required battery model is a flat CR 2032 3V.


Updated on 5 August 2026 by ScegliAuto


Related tutorials

How to Replace the Key Fob Battery on a KIA Borrego?
How to Replace the Key Fob Battery on a KIA Borrego?
Kia Mohave Borrego (2008-2019 / HM) In this tutorial, you will see how to replace the key fob battery on a KIA Borrego. For this simple and quick task, you will need a replacement CR203…
Where is the Fuse Box Located on a Kia Mohave Borrego?
Where is the Fuse Box Located on a Kia Mohave Borrego?
Kia Mohave Borrego (2008-2015 / ) In this video tutorial, you can see where the fuse box is located on a Kia Mohave Borrego, following simple steps that will help you manage your vehi…
How to Replace the Rear Shock Absorber in a Kia Borrego?
Kia Mohave Borrego (2008-2019 / HM) To replace the rear shock absorber in a Kia Borrego, loosen the bolts that secure the shock absorber at both the upper and lower ends, corresponding …

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos