Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Sportage
    4. : How to replace the battery of the KIA Sportage remote control?

Kia Sportage - Video tutorial

Model: Kia Sportage SL, MK 3 - Years 2010-2016
Part: Key
Operation: How to replace the battery of the KIA Sportage remote control?

Replacing the battery of the KIA Sportage remote control, as we can see in this tutorial, is an extremely simple and quick operation. To do this, we will need a small screwdriver with a flat tip and a replacement battery of type CR2032. First of all, press the button on the top and extend the emergency key, then lever the screwdriver into the indicated slot to unlock the rear door. Once fully opened, we can remove the old battery, place the replacement one in the correct direction, and reassemble everything.


Posted on 29 July 2023 by ScegliAuto



How do you replace the battery in the Kia Sportage remote control?
Kia Sportage (2016-2022 / QL, MK 4) The procedure for replacing the battery of the remote control on the Kia Sportage is done by pressing the button located at the top of the device: th
How to change the battery of the Kia Sportage Series 4 remote control?
Kia Sportage (2016-2022 / QL, MK 4) Does your Kia Sportage remote control not always work as it should and have moments when it seems dead? It could be due to a dead battery. Replacing
Replacing the remote control battery on the Kia Sportage MK4
Kia Sportage (2016-2022 / QL, MK 4) Today we will discover the instructions that will allow us to remove and replace the key remote control battery on the Kia Sportage fourth series, in

Other guides that may interest you

    Frequently Asked Questions

    • Sportage 2021-2027 - Why is the remote control of the Kia Sportage not working? Read Answer
    • Sportage 2016-2022 - How to replace the key battery on Kia cars? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos