Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the Service light on a Kia Stonic?

Model: Kia Stonic Ybcuv, MK 1 - Years 2017-2026
Part: Service warning light

To reset the Service light on a Kia Stonic, turn on the ignition by rotating the key in the ignition switch. Once the dashboard is lit, press and hold the RESET button located on the right side of the steering wheel. When the Service light starts to flash, release the button and then press and hold it again. Continue holding the button until the light resets, then you can turn off the ignition.

Updated on 23 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Kia Stonic (2017-2026 / Ybcuv, MK 1) To reset the Service light on the Kia Stonic, you need to turn on the instrument panel by turning the ignition key inside the corresponding block: on…
Kia Stonic (2017-2026 / Ybcuv, MK 1) You can completely eliminate the Service light that appears on the instrument panel of the Kia Stonic by turning on the instrument panel by turning t…
Kia Stonic (2017-2026 / Ybcuv, MK 1) To reset the "Service" light on a Kia Stonic, start by turning on the car. Then, use the buttons on the steering wheel to navigate to the dashboard s…

Other guides you may be interested in

    Frequently Asked Questions

    • Kia Stonic 2017-2026 - What does the oil warning light on the Kia Stonic mean? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos