Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the Kia Stonic key remote battery

Model: Kia Stonic Ybcuv, MK 1 - Years 2017-2026
Part: Key

The instructions in this guide will show us how to disassemble and replace the battery of the Kia Stonic key remote. First, take our remote control and start by removing the physical key from inside it; then pry open the side of the remote control to access the electronic board and the battery, as shown in the video. At this point, remove and replace the battery with a new one of the correct type and with the same code; insert it in the correct direction and reassemble the plastic cover of the remote control!

Posted on 28 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Fob Battery of the Kia Stonic?
How to Replace the Key Fob Battery of the Kia Stonic?
Kia Stonic (2017-2026 / Ybcuv, MK 1) To replace the battery of the Kia Stonic key fob, remove the key from the top of the device to leverage inside its housing. Once the key is removed, …
How to Replace the Key Battery of the Kia Stonic?
How to Replace the Key Battery of the Kia Stonic?
Kia Stonic (2017-2026 / Ybcuv, MK 1) The key battery of the Kia Stonic will inevitably run out over time, so it needs to be replaced. Given the simplicity of this task, there is no need …
How do you reset the Service light on the Kia Stonic?
How do you reset the Service light on the Kia Stonic?
Kia Stonic (2017-2026 / Ybcuv, MK 1) You can completely eliminate the Service light that appears on the instrument panel of the Kia Stonic by turning on the instrument panel by turning t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos