Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Battery of a Kia Stonic

Model: Kia Stonic Ybcuv, MK 1 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Key

Video tutorial

This video will show you how to replace the battery of a Kia Stonic key. The first step is to remove the internal key by pressing the appropriate button shown at 0:15. Next, lever in the area adjacent to the slot left open after extracting the key, as shown at 0:30. This will allow you to separate the two parts of the casing; in one of these, you will find the battery, which you need to slide out of its holder.

Now you can insert the replacement CR2032 battery; then refit the two side clips.

Finally, reassemble the two parts of the casing and reinsert the key.


Updated on 7 May 2026 by ScegliAuto


Related tutorials

How to Replace the Key Fob Battery of the Kia Stonic?
How to Replace the Key Fob Battery of the Kia Stonic?
Kia Stonic (2017-2026 / Ybcuv, MK 1) To replace the battery of the Kia Stonic key fob, remove the key from the top of the device to leverage inside its housing. Once the key is removed, …
Where to Find the Fuse Box of the Kia Stonic
Kia Stonic (2017-2026 / Ybcuv, MK 1) Finding the fuse box inside your Kia Stonic is quite simple and you just need to follow these steps. First, park the car safely and then switch it of…
Replacement of the Kia Stonic key remote battery
Replacement of the Kia Stonic key remote battery
Kia Stonic (2017-2026 / Ybcuv, MK 1) The instructions in this guide will show us how to disassemble and replace the battery of the Kia Stonic key remote. First, take our remote control a…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos