Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Spark Plugs on a Kia Picanto

Model: Kia Picanto MK 1, 2A - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Spark plugs

See other generations:
Video tutorial

Follow these instructions to remove and replace the spark plugs on a Kia Picanto. First, open the bonnet of the vehicle and begin removing the connectors or leads from the spark plugs.

Then, use a socket wrench with an extension to unscrew and remove the spark plugs, as shown in the video. Now, install the new spark plugs of the correct type and with the same thread pitch.

Hand-tighten them all, then gently tighten with a spanner, reconnect the spark plug connectors, and start the engine!


Updated on 23 August 2026 by ScegliAuto


Related tutorials

How to Replace the Spark Plugs in a KIA Picanto?
Kia Picanto (2011-2018 / TA, MK 2) In this tutorial, see how to replace the spark plugs in a KIA Picanto, a very simple and quick operation. First, ensure the engine is completely cold…
How to Change the Spark Plugs of the Kia Picanto MK1
How to Change the Spark Plugs of the Kia Picanto MK1
Kia Picanto (2004-2011 / MK 1, 2A) In this video, see how to change the spark plugs of the Kia Picanto MK1: in this vehicle, the spark plug compartment is easily accessible, allowing y…
Where to Find the OBD2 Port on a Kia Picanto 2
Where to Find the OBD2 Port on a Kia Picanto 2
Kia Picanto (2011-2018 / TA, MK 2) If you are curious about where the OBD2 port is located on your Kia Picanto second generation (2011-2018), just pay attention to the description in t…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos