Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Spark Plugs of the Kia Picanto MK1

Model: Kia Picanto MK 1, 2A - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Spark plugs

See other generations:
Video tutorial

In this video, see how to change the spark plugs of the Kia Picanto MK1: in this vehicle, the spark plug compartment is easily accessible, allowing you to remove the rubber cap of the spark plugs with ease, using a ratchet to take them out of their housing.

Be careful when removing them from the channel where they are housed, as if they fall in, it can be very difficult to retrieve them: so exercise maximum caution at this stage of the job. The same applies when inserting the new spark plugs into the channel.

Screw them back in and then reconnect each spark plug's lead. Start the vehicle; this is the moment of truth to see if everything has gone well.


Updated on 28 October 2026 by ScegliAuto


Related tutorials

How to Replace the Spark Plugs on a Kia Picanto
How to Replace the Spark Plugs on a Kia Picanto
Kia Picanto (2004-2011 / MK 1, 2A) Follow these instructions to remove and replace the spark plugs on a Kia Picanto. First, open the bonnet of the vehicle and begin removing the connec…
How to Replace the Spark Plugs in a KIA Picanto?
Kia Picanto (2011-2018 / TA, MK 2) In this tutorial, see how to replace the spark plugs in a KIA Picanto, a very simple and quick operation. First, ensure the engine is completely cold…
How to Replace the Fuel Pump on Kia Picanto
How to Replace the Fuel Pump on Kia Picanto
Kia Picanto (2004-2011 / MK 1, 2A) These brief and simple steps will guide you on how to remove and replace the fuel pump on the Kia Picanto. First, open the rear doors of the vehicle …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos