Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Picanto
    4. : How to replace spark plugs in KIA Picanto?

Kia Picanto - Video tutorial

Model: Kia Picanto TA, MK 2 - Years 2011-2018
Part: Spark plugs
Operation: How to replace spark plugs in KIA Picanto?

In this tutorial we can see how to replace the spark plugs in your KIA Picanto, a very simple and fast operation. First of all, let's make sure that the engine is completely cold, then open the bonnet, identify the coils and, using a 10mm socket wrench, unscrew the relative 3 fixing bolts. Once this is done, disconnect the connectors, grab the first spark plug with the appropriate 16mm spanner and slowly unscrew it. If necessary, apply some unblocking spray. At this point we can extract the spark plug, insert the spare part, tighten it and repeat the operation for the other cylinders.


Posted on 15 May 2023 by ScegliAuto



How to replace the spark plugs of the Kia Picanto
Kia Picanto (2004-2011 / MK 1, 2A) Below we will see the instructions that will allow us to disassemble and replace the spark plugs of the Kia Picanto, following these simple steps. Fi
Where is the OBD2 port located in the Kia Picanto 2?
Kia Picanto (2011-2018 / TA, MK 2) If you are curious to know where the OBD2 port is located on your second-generation Kia Picanto (year 2011-2018), then you just need to pay attention
How to reset the TPMS light of the 2015 Kia Picanto.
Kia Picanto (2011-2018 / TA, MK 2) If the orange tire pressure monitoring system (TPMS) light on the instrument panel of your second-generation Kia Picanto (2015 model year) illuminate

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos