Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Applying the Boot Sill Protector

Model: Kia Sorento MK 2 - Years: 2009, 2010, 2011, 2012, 2013, 2014
Part: Rear bumper

See other generations:
Video tutorial

The boot sill protector is an insert, generally made of steel or chrome ABS, to be applied to the bumper edge at the entrance of the boot to preserve its integrity; adhesive tape is already applied to the back of the sill, but it is recommended to apply additional tape to ensure perfect adhesion over time and prevent it from peeling off. Once additional tape is applied, mark the central position for reference during placement, clean the bumper surface, remove the film, and firmly press the sill into place; the aesthetic result will certainly be pleasing.


Updated on 21 February 2026 by ScegliAuto


Related tutorials

How to Open the Tailgate of a Kia Sorento
How to Open the Tailgate of a Kia Sorento
Kia Sorento (2020-2026 / MK 4) This short guide will show you how to open the tailgate of the Kia Sorento boot, following the instructions below. There are indeed two types of vers…
How to Open a Stuck Tailgate on the KIA Sorento?
How to Open a Stuck Tailgate on the KIA Sorento?
Kia Sorento (2020-2026 / MK 4) In the KIA Sorento, it may happen that the tailgate gets stuck, for example, due to a fault in the lock actuator or the corresponding control button.…
Overview and Installation of the Load Net
Overview and Installation of the Load Net
Kia Sorento (2009-2014 / MK 2) Open the boot and prepare the load net. The net has two elastic straps at the top corners and two carabiners at the bottom corners. To install the lo…

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos