Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Sorento
    4. : How to open the locked tailgate on the KIA Sorento?

Kia Sorento - Video tutorial

Model: Kia Sorento MK 4 - Years 2020-2024
Part: Checks and maintenance
Operation: How to open the locked tailgate on the KIA Sorento?

In the KIA Sorento, it can happen that the tailgate gets stuck, for example due to a malfunction of the lock actuator or the related control button. In this case, we can still perform the emergency opening procedure by following the steps shown in this tutorial. First, we open the rear doors, then lower the backrest of the sofa completely and position ourselves inside the trunk. We then locate the small indicated door, remove it, and manually release the mechanism. At this point, we can open the tailgate and repair the faulty element.


Posted on 26 June 2023 by ScegliAuto



How to open the locked fuel door in the KIA Sorento?
Kia Sorento (2014-2020 / MK 3) In our KIA Sorento, it is possible for the fuel door to become locked, for example due to a malfunction of the actuator or the control located inside
How to open the fuel door locked in the KIA Sorento?
Kia Sorento (2009-2014 / MK 2) In the KIA Sorento, it may happen that the fuel tank door gets stuck, for example due to a problem with the control button or the lock actuator. In t
How do you replace the third brake light bulb on the Kia Sorento?
Kia Sorento (2002-2009 / MK 1) In order to replace the third brake light bulb on the Kia Sorento, you need to open the tailgate so that you can loosen the screws that fix the inter

    Frequently Asked Questions

    • Sorento 2014-2020 - What problems does the Kia Sorrento 2.5 crdi have? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos