Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Picanto
    4. : Where is the fuse box of the Kia Picanto located?

Kia Picanto - Video tutorial

Model: Kia Picanto MK 2, TA - Years 2011-2018
Part: Fuse box
Operation: Where is the fuse box of the Kia Picanto located?

The Kia Picanto has two fuse boxes inside. The first fuse box is located inside the cabin, specifically behind the driver's side dashboard. Inside the cabin fuse box is the OBD port, recognizable by its black color and fluorescent purple stripe. The second fuse box is located inside the engine compartment, specifically near the battery. Both fuse box covers have indications of their contents, with descriptions of the amperage and names to facilitate replacement.


Posted on 5 April 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Picanto 2011-2018 - Where are the fuses located in the Kia Picanto? Read Answer
    • Picanto 2004-2011 - Where is the cigarette lighter fuse of the Kia Picanto? Read Answer
    • Picanto 2004-2011 - Where is the car radio fuse of the Kia Picanto? Read Answer
    • Picanto 2018-2025 - Where is the starter motor fuse on the Kia Picanto? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos