Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil on the KTM 1290 Super Adventure?

Model: Ktm 1290 Super Adventure S
Part: Engine oil

Video tutorial

In this tutorial, you will see how to change the engine oil on the KTM 1290 Super Adventure, a very simple and quick operation. First, wait until the engine is cool enough, then position a container underneath it and remove the protective cover.

Next, unscrew the bolts from the two drain holes using a 13mm socket, allowing the oil in the system to drain out. Open the filter housing with an 8mm socket and insert the replacement. Finally, reassemble everything and pour the new oil through the designated upper hole.


Updated on 19 October 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil in the KTM 1290 Super Adventure S?
How to Change the Engine Oil in the KTM 1290 Super Adventure S?
1290 Super Adventure S In this tutorial, see how to change the engine oil in the KTM 1290 Super Adventure S, a very simple and quick operation. First, ensure the engine is …
How to Change the Engine Oil in the KTM 1290 Super Adventure S
How to Change the Engine Oil in the KTM 1290 Super Adventure S
1290 Super Adventure S In this tutorial, learn how to change the engine oil in the KTM 1290 Super Adventure S, a very simple and quick operation to perform every 12 months.…
How to change the engine oil in the KTM 1290 Super Adventure S?
How to change the engine oil in the KTM 1290 Super Adventure S?
1290 Super Adventure S In this tutorial, you will see how to change the engine oil in the KTM 1290 Super Adventure S, a very simple and quick operation. First, wait until t…

How to Replace the Drive Belt on a Peugeot Elyseo 50

This guide provides instructions for removing and replacing the drive belt on the Peugeot Elyseo 50 scooter. First, place the scooter on its centre stand and begin by removing the transmission cover by unscrewing the fastening screws located on the sides; then remove the fan and clutch bell by unscrewing the central nuts, as shown in the video. This will allow you to remove the variator and the drive belt, replacing it with a new original one; also replace the rollers if necessary, applying the reverse procedure!

Watch the video!


by ScegliAuto

More videos