Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the engine oil in the KTM Duke 390?

Model: Ktm Duke 390
Part: Engine oil

This video is currently unavailable

Replacing the motor oil in the KTM Duke 390, as we can see in this tutorial, is an extremely simple and quick operation. First of all, we wait for the engine to cool down enough, then we remove the lower protective cover, locate the front drainage hole bolt and unscrew it using a 14mm socket wrench.

We then unscrew the secondary filter bolt with a 19mm wrench, clean it from any dirt residue and proceed to replace the main filter. At this point, all that's left is to reassemble everything and pour the new oil through the appropriate hole.


Posted on 6 July 2025 by ScegliAuto


Related tutorials

How to change the engine oil in the KTM Duke 390?
How to change the engine oil in the KTM Duke 390?
Duke 390 In this tutorial, we will see how to change the engine oil in the KTM Duke 390, a very simple and quick operation. First, ensure that the engine is c…
How to Change the Engine Oil in the KTM Duke 390?
How to Change the Engine Oil in the KTM Duke 390?
Duke 390 In this tutorial, you will learn how to change the engine oil in the KTM Duke 390, a very simple and quick operation to perform every 12 months. Firs…
How to Change the Engine Oil in a KTM Duke 390?
How to Change the Engine Oil in a KTM Duke 390?
Duke 390 In this tutorial, you can see how to change the engine oil in the KTM Duke 390, a very simple operation. First, wait for the engine to cool completel…

How to Reset the Service Light on the Gilera Nexus 500

This video shows the procedure to reset the service light on the Gilera Nexus when the light remains on after a service. The procedure is straightforward and takes less than a minute. To reset the light, press the mode button and the odo/set button simultaneously. While holding them down, turn the ignition key to the ON position. Once the instruments are on, release the buttons and press the mode button once. The maintenance light will illuminate; hold the mode button for a few seconds to reset it.

Watch the video!


by ScegliAuto

More videos