Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Basic Service on a KTM EXC F 500

Model: Ktm Exc F 500
Part: Engine oil

Video tutorial

As you may already know, changing the oil is easier when the engine and the circulating lubricant are warm. That said, be careful not to burn yourself.

You will need 1.2 litres of synthetic oil for engines 10W-50. Before unscrewing the bolt that acts as a plug for the drain hole, you must unscrew the screws of the only protective plastic cover located under the engine bay. Once removed, clear the drain hole as shown in the video, and while collecting the used oil in a container, unscrew and remove the two oil filters, then insert the new ones you have purchased.

Fill with new oil through the upper hole.


Updated on 4 April 2026 by ScegliAuto


Related tutorials

How to Perform a Maintenance Service on a KTM EXC-F 500 (2021)
Exc F 500 Discover the steps to perform the regular maintenance service by changing the engine oil on a KTM EXC-F 500. First, unscrew the oil drain bolt locate…
How to Change the Engine Oil on the KTM EXC-F 500
How to Change the Engine Oil on the KTM EXC-F 500
Exc F 500 In this video tutorial, you will see the main instructions for replacing the engine oil and oil filter, performing the routine maintenance service on…
How to Replace the Fork Oil on a KTM EXC-F 500
How to Replace the Fork Oil on a KTM EXC-F 500
Exc F 500 In this video tutorial, you will learn how to disassemble and replace the fork oil on the KTM EXC-F 500 enduro bike in simple and quick steps. First,…

How to Replace the Handlebars on a Benelli Leoncino 500?

To replace the handlebars on a Benelli Leoncino 500, loosen the screws at both ends to free the weights from their housing. Once the weights are removed, you can slide off the grips and disconnect all the electronic controls on the handlebars. At this point, unscrew the bolts securing the handlebars in the centre, allowing them to be completely removed from their housing. Insert the new replacement part into its place, securing it and reinstalling all previously removed parts.

Watch the video!


by ScegliAuto

More videos