Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Rear Brake Pads on the KTM 250 SX

Model: Ktm Sx 250
Part: Brake pads

Video tutorial

In this video tutorial, you will see how to remove and replace the rear brake pads on the KTM 250 SX enduro bike, as well as on most enduro bikes such as Husaberg and Husqvarna. First, remove the brake pad retaining clip using pliers; then extract the central pin, as shown in the video.

At this point, remove the old pads and replace them with new ones of the correct type, cleaning the caliper of dirt first; finally, reassemble everything by applying the reverse procedure!


Updated on 26 April 2026 by ScegliAuto


Related tutorials

Sx 250 This brief and simple video shows how to remove and replace the engine air filter on the KTM SX-F 250 enduro bike, as well as on the 125 and 50 model…
Sx 250 In this video, you will see how to change the transmission oil, performing the regular maintenance service on a KTM 250 SX. First, position the bike …
Sx 250 These brief and simple instructions will guide you on how to disassemble and replace the air filter of the KTM SX 250 engine. First, place the bike o…

How to Replace the Headlight Bulb on the SYM Bonus 110 Scooter?

As shown in this tutorial, replacing the headlight bulb on the SYM Bonus 110 scooter is a very simple and quick task. Before proceeding, ensure the key is not inserted for safety. Start by removing both mirrors, then unscrew all the screws securing the front fairing and separate it from the handlebars. Finally, disconnect the power connector, unscrew the bulb holder screws, and remove the bulb from the headlight. Fit the replacement bulb, avoiding direct contact with the glass using bare hands.

Watch the video!


by ScegliAuto

More videos