Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today, let's briefly go over the steps needed to remove and replace the front headlight bulb on a KTM Duke 690, following these simple steps. First, place your bike on the central stand and begin by removing the front headlight by unscrewing the screws located on the sides; then disconnect the electrical connector of the bulb and release the metal clip to remove it, as shown in the video. Now, install the new bulb of the correct type and with the same fitting, and reassemble the front headlight!

Updated on 23 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Headlight Bulb on a KTM Duke 690
Replacing the Front Headlight Bulb on a KTM Duke 690
Duke 690 In this video, see how to dismantle and replace the front headlight bulb on a KTM Duke 690 in simple steps. First, remove the front headlight; to do …
How to replace the spark plug in a KTM Duke 690?
How to replace the spark plug in a KTM Duke 690?
Duke 690 In this tutorial, you will see how to replace the spark plug in a KTM Duke 690, a very simple and quick operation. First, ensure the engine is comple…
Changing Engine Oil and Oil Filter on KTM Duke 690
Changing Engine Oil and Oil Filter on KTM Duke 690
Duke 690 In this video tutorial, we will see how to change the engine oil and oil filter on a KTM Duke 690, performing the regular maintenance service. First,…

How to Reset the Engine Oil Light on a Yamaha XMax 250

This short video demonstrates the procedure to reset the engine oil light on a Yamaha XMax 250 scooter. The operation is very simple and quick; first, insert the motorcycle key into the designated slot and turn it to the first position to power on the instrument panel without starting the vehicle. At this point, you will see the light on the display; simply press the "oil change" button located at the centre of the motorcycle's speedometer and hold it until the light stops flashing. The operation will then be complete; to verify success, turn off and then turn on the instrument panel.

Watch the video!


by ScegliAuto

More videos