Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Ktm Exc 500
Part: Engine oil

The DIY procedure for replacing the engine oil and oil filter is quite simple; let’s see how to carry out the routine maintenance service on the KTM EXC-F 500. First, place the bike on a stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; remove and clean the small oil filter, as shown in the video. Now, unscrew the bolts of the main oil filter cover, removing and replacing the cartridge with a new one; finally, pour in the new oil!

Updated on 25 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Oil and Filter on a KTM EXC 500
How to Change the Oil and Filter on a KTM EXC 500
Exc 500 The oil change on a KTM EXC 500 should be performed at 1,240 miles, unless you use your bike for racing, in which case the oil should be replaced imm…
How to change the motor oil of a KTM 500 EXC?
How to change the motor oil of a KTM 500 EXC?
Exc 500 To change the motor oil of your KTM 500 EXC, the process begins by placing the bike in a stable position, preferably on a stand, so that it is comple…
How do you replace the gasket of the counter shaft of the KTM EXC 500?
How do you replace the gasket of the counter shaft of the KTM EXC 500?
Exc 500 In order to replace the counter shaft seal of the KTM EXC 500, you need to loosen the nut that secures the sprocket to its housing, on the left side …

How to replace the headlight bulbs on a Suzuki GSXR 600?

In this tutorial, you will see how to replace the headlight bulbs on a Suzuki GSXR 600, an extremely simple and quick operation. First, ensure that the key is not inserted, then unscrew the two indicated screws and separate the dashboard from the support. Next, disconnect the power connectors of the bulbs, remove the rubber caps, and unclip the metal clips to extract the bulbs from their respective housings. At this point, you can insert the replacements, avoiding touching the glass directly with your bare hands, and follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos