Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Exhaust on a KTM EXC 500?

Model: Ktm Exc 500
Part: Exhaust muffler

Video tutorial

To replace the exhaust on the KTM EXC 500, loosen the screws securing the rear mudguard's fairing on the right side. Once the screws are loosened, you can detach this panel and proceed to loosen the screws on the supports.

By expanding the ring that connects the exhaust to the manifold, you can then remove the exhaust and fit the new one. Once the new exhaust is securely attached, connect it to ensure everything functions correctly.


Updated on 10 October 2026 by ScegliAuto


Related tutorials

How to Replace the Clutch on the KTM EXC 500?
How to Replace the Clutch on the KTM EXC 500?
Exc 500 To replace the clutch on the KTM EXC 500, loosen the screws securing the cover on the right side of the bike. Once these screws are loosened, remove …
How do you replace the gasket of the counter shaft of the KTM EXC 500?
How do you replace the gasket of the counter shaft of the KTM EXC 500?
Exc 500 In order to replace the counter shaft seal of the KTM EXC 500, you need to loosen the nut that secures the sprocket to its housing, on the left side …
How to Replace the Side Stand on the KTM Exc 500
How to Replace the Side Stand on the KTM Exc 500
Exc 500 Today's instructions will show you how to remove and replace the side stand on the KTM Exc 500 enduro bike. First, disconnect and remove the existing…

How to Change the Engine Oil on a Benelli 150

To change the engine oil on a Benelli 150, ensure the bike is on a stable surface, using the centre stand to keep it upright. Before starting, it's helpful to run the engine for a few minutes to warm the oil and facilitate drainage. Turn off the engine and locate the drain plug situated under the engine. Using an appropriate spanner, loosen the plug and position a container underneath to collect the used oil. Allow it to drain completely, ensuring all the liquid is removed. Once emptied, carefully re-tighten the plug, avoiding overtightening. Using a funnel, slowly pour new oil into the tank, checking the level with the dipstick or inspection window. When the level is correct, start the engine for a couple of minutes to circulate the new oil, then turn it off and check the level again, topping up if necessary.

Watch the video!


by ScegliAuto

More videos