Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Time on the KTM RC 390

Model: Ktm Rc 390
Part: Clock

Video tutorial

In this tutorial, you will learn how to set the time on the KTM RC 390, a simple task to perform after replacing the battery or changing to daylight saving time. First, insert the key and turn on the instrument cluster; it is not necessary to start the engine.

Then, press and hold both buttons located to the left of the display until the time starts to flash. Once this is done, adjust the hours with quick presses of the upper button and the minutes with the lower button.

To save the setting, press both buttons a second time.


Updated on 23 August 2026 by ScegliAuto


Related tutorials

How to Change the Time on the KTM RC 390
How to Change the Time on the KTM RC 390
Rc 390 If you own a KTM RC 390 and want to manually change the system time displayed on the central dashboard, read this guide and put the instructions into…
How to Remove the Rear Wheel on the KTM RC 390
How to Remove the Rear Wheel on the KTM RC 390
Rc 390 Discover the main instructions to remove the rear wheel from a KTM RC 390 motorcycle in simple steps. First, lift the motorcycle using a rear stand; …
How to remove the right side fairing of a KTM RC 390
How to remove the right side fairing of a KTM RC 390
Rc 390 Before starting, it is advisable to position your KTM RC 390 upright. Begin by unscrewing and removing the internal and external screws that secure t…

How to Change the Engine Oil on a Benelli 150

To change the engine oil on a Benelli 150, ensure the bike is on a stable surface, using the centre stand to keep it upright. Before starting, it's helpful to run the engine for a few minutes to warm the oil and facilitate drainage. Turn off the engine and locate the drain plug situated under the engine. Using an appropriate spanner, loosen the plug and position a container underneath to collect the used oil. Allow it to drain completely, ensuring all the liquid is removed. Once emptied, carefully re-tighten the plug, avoiding overtightening. Using a funnel, slowly pour new oil into the tank, checking the level with the dipstick or inspection window. When the level is correct, start the engine for a couple of minutes to circulate the new oil, then turn it off and check the level again, topping up if necessary.

Watch the video!


by ScegliAuto

More videos