Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Sprocket on a KTM EXC 500

Model: Ktm Exc 500
Part: Drivetrain

Video tutorial

Below are the main instructions for removing and replacing the rear sprocket on the KTM EXC 500 enduro bike. First, remove the rear wheel from your bike by unscrewing the central axle and removing the chain.

Next, unscrew the fixing screws of the sprocket attached to the wheel rim to remove it. Replacing the sprocket often requires replacing the front sprocket as well, which must be matched to ensure the correct operation of the drivetrain. Then, refit the new sprocket and the rear wheel!


Updated on 10 September 2026 by ScegliAuto


Related tutorials

How to Replace the Side Stand on the KTM Exc 500
How to Replace the Side Stand on the KTM Exc 500
Exc 500 Today's instructions will show you how to remove and replace the side stand on the KTM Exc 500 enduro bike. First, disconnect and remove the existing…
How to Replace the Rear Brake Pads on the KTM EXC 500?
How to Replace the Rear Brake Pads on the KTM EXC 500?
Exc 500 As shown in this tutorial, replacing the rear brake pads on the KTM EXC 500 is an extremely simple and quick task. First, position yourself in front …
How to Replace the Clutch on the KTM EXC 500?
How to Replace the Clutch on the KTM EXC 500?
Exc 500 To replace the clutch on the KTM EXC 500, loosen the screws securing the cover on the right side of the bike. Once these screws are loosened, remove …

How to Replace the Wing Mirror on a Harley Davidson Sportster

To replace the wing mirror on a Harley Davidson Sportster, loosen the nut located at the base of the mirror, at the bottom of the handlebars. Once this nut is fully loosened, you can slide out the pin that secures the mirror to the handlebars, completely removing the old mirror from its housing and replacing it with a new replacement part. The new mirror should be positioned, inserting the corresponding pin, and finally secured by tightening the nut at the bottom of the handlebars.

Watch the video!


by ScegliAuto

More videos