Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial we can see how to replace the engine oil in the Kymco Xciting S 400i scooter, a very simple and fast operation. First of all, make sure that the engine is sufficiently cold, then place a container under the scooter, locate the drain plug and unscrew it using a socket wrench. Let all the oil in the system drain out, open the filter cap and insert the replacement. At this point, all that remains is to reassemble everything and add the necessary amount of oil through the designated upper hole.

Posted on 11 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the engine oil of the Kymco Xciting S 400i?
How do you replace the engine oil of the Kymco Xciting S 400i?
Xciting S 400i To perform the oil change on the Kymco Xciting S 400i, you will need to loosen the screws that hold the drain plug of the oil pan located in the cent…
How to Change the Engine Oil on the Kymco Xciting S 400i
How to Change the Engine Oil on the Kymco Xciting S 400i
Xciting S 400i To change the engine oil on the Kymco Xciting S 400i, you need to unscrew the oil drain plug located at the bottom of the bike: this will allow you t…
How to Change the Engine Oil on Kymco Xciting S 400i?
How to Change the Engine Oil on Kymco Xciting S 400i?
Xciting S 400i To change the engine oil on the Kymco Xciting S 400i, first unscrew the oil drain plug located at the central lower part of the bike: this will allow…

How to Turn Off the "V-Belt" Warning Light on a Yamaha X-MAX 400 Scooter?

In this tutorial, learn how to turn off the "V-Belt" warning light on the Yamaha X-MAX scooter's instrument panel, a very simple and quick operation. Before doing this, ensure you have completed the required maintenance, specifically replacing the drive belt. Start by inserting the key and turning on the ignition, then open the small right glove compartment and unscrew the screw for the upper cover. Once removed, locate the white connector with a jumper attached, disconnect it, wait about 10 seconds, and reconnect it. If successful, the warning light will disappear.

Watch the video!


by ScegliAuto

More videos