Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Kymco
    3. : Downtown 200i : How to replace the transmission belt Kymco 200i

Model: Kymco Downtown 200i
Part:
How to replace the transmission belt Kymco 200i

When the drive belt is worn it is recommended to replace it to avoid damaging more expensive parts. Quiet is super easy, especially with this guide. Remove the crankcase cover bolts, then switch to the crankcase bolts. Loosen the screw on the footrest to make room for you if you need to. Once the cover has been removed, to disassemble the variator you need a compressed air gun or a piston lock. Then to unscrew the nut relating to the clutch, brake the rear wheel. Now unscrew the variator bolt. Proceed to replace the belt with the new spare and reassemble everything. I recommend that you clean the transmission compartment with just compressed air and a brush.


Posted on 11 November 2023 by ScegliAuto

How to replace the brake pads on the Kwasaki KLR 650?

To be able to replace the brake pads of the Kawasaki KLR 650 you must perform the same procedure for both the front and rear wheels. First of all, it will be necessary to unscrew the bolts that secure the brake caliper to the relative disc, so that it can be completely detached. After the caliper has been removed from its disc, it will be possible to go and take out the pads that are inside it, inserting the new spare parts. After the pads have been inserted, it will be possible to go and position the caliper on its disc, fixing it with the screws.

Watch the video!


by ScegliAuto

More videos