Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Indicator Bulbs on Kymco Agility 125

Model: Kymco Agility 125
Part: Side marker light

Video tutorial

Unscrew the screw located behind the small cover containing the indicator. This will allow you to remove the orange cover and access the bulb.

At this point, you can slightly unscrew the bulb, just enough to pull it out of its socket. Similarly, insert the new bulb you purchased, which corresponds to the one removed, and screw it in until it is secure.

Refit the orange cover by first placing it in position and then screwing in the screw. If you need to replace both indicator lights, repeat the process.

As you can see, this is a very simple task that you can do yourself.


Updated on 2 April 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Indicator Bulb on a Kymco Agility 125?
How to Replace the Rear Indicator Bulb on a Kymco Agility 125?
Agility 125 To replace the rear indicator bulb on the Kymco Agility, open the under-seat compartment to access all the screws securing the rear fairing. This fai…
How to Reset the Oil Change Warning Light on a Kymco Agility 125
How to Reset the Oil Change Warning Light on a Kymco Agility 125
Agility 125 Before you start, sit on the seat of your Kymco Agility 125. Next, turn the key in the ignition switch to activate the instrument panel. Then, press …
How to Replace the Exhaust on a Kymco Agility 125?
How to Replace the Exhaust on a Kymco Agility 125?
Agility 125 To replace the exhaust on a Kymco Agility 125, loosen the screws on the supports that hold it in place to free it completely. You will also need to w…

How to remove the seat on a Yamaha Tracer 9 GT?

In this tutorial, you can see how to remove the seat on a Yamaha Tracer 9 GT, a very simple and quick operation, for example, if you need to access the battery. First, remove the passenger seat by inserting the key into the designated lock, then locate the indicated rubber element and remove it by pulling it outwards. Next, insert your hand into the indicated gap, hold down the release lever, and simultaneously detach the seat from the support. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos